IgorSky Posted April 12, 2017 Report Share Posted April 12, 2017 Hello to all!Two weeks ago I started another small project in a bottle. This time it is a model of the pilot cutter Jolie Brise. This boat I like for a long time and now, finally, I "matured" for its construction. More or less suitable drawings of this boat, I never found. Found only the theoretical drawing of the hull and the general scheme of the sails. Also I found in the network a number of photos.Well, and a suitable bottle was found.A little of the history about Jolie Brise - https://en.wikipedia.org/wiki/Jolie_Brise JesseLee, John Zuch, NJQUACK and 2 others 5 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 So, two weeks ago, on the first day of my short vacation, I started this building.I started, as usual, with the manufacture of the base of the hull, which will be detachable at the waterline.First, I cut out the wooden plates, of which the hull will consist. JesseLee, IOAN, Lboro and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Next, I proceeded to further processing the plates. John Zuch, JesseLee, IOAN and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then I drilled holes for wooden studs and glued together the plates that make up the upper and lower parts of the hull. JesseLee, John Zuch, IOAN and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Now I could continue the further processing of the hull base. Lboro, John Zuch, JesseLee and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 The deck of the boat has a rather noticeable bend. In addition, the nose is markedly elevated with respect to the stern. Lboro, John Zuch, JesseLee and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then came the turn of planking of the deck. I started with the central board and then I continued to cover the deck boards from the center to the sides. Lboro, John Zuch, JesseLee and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then I processed the deck. Lboro, JesseLee, John Zuch and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Now it was possible to proceed to the sheathing of the boardes and the stern of the hull. I started with the stern, in which there are holes, apparently playing the role of scuppers. Because I was not sure that I would be able to cut through these "windows" in the hornbeam planking qualitatively, then I decided to make a compositing design. IOAN, John Zuch and JesseLee 3 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Next, I pasted the stem and continued to planking the stern Lboro, IOAN and John Zuch 3 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then I proceeded to planking the boards. Alex Bellinger, John Zuch, IOAN and 3 others 6 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 The boards also have narrow scuppers at the deck level. Therefore, I cut them in the parts of the planking of the boards, protruding above the deck before gluing the bulwarks. John Zuch, JesseLee, IOAN and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then I glued the first planks of bulwarks to the right and left boards. So I got scuppers. JesseLee, John Zuch, Lboro and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Next update. On the bulwarks above the scuppers there is a narrow red strip. In order not to worry about drawing these strips, I decided to make them too from hornbeam. Alex Bellinger, John Zuch, Caleb and 2 others 5 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Then I glued another belt of plating the bulwark from the black hornbeam. Chasseur, Alex Bellinger, Lboro and 3 others 6 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 Next, I glued the posts to the inside surface of the bulwarks. Because The bulwarks themselves gradually reduce their thickness in the process of sanding them from the outside, then their additional strengthening will be very useful. In addition, they will be very useful and to increase the area of gluing when installing gunwales. Bernard Kelly, John Zuch, Lboro and 6 others 9 Quote Link to comment Share on other sites More sharing options...
IOAN Posted April 12, 2017 Report Share Posted April 12, 2017 Beautiful!With what measure if you cut ruler? IgorSky, Chasseur and Lboro 3 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 12, 2017 Author Report Share Posted April 12, 2017 15 minutes ago, IOAN said: Beautiful!With what measure if you cut ruler? Thank you, IOAN! I'm afraid that I don't quite understand your question ... Lboro and IOAN 2 Quote Link to comment Share on other sites More sharing options...
IOAN Posted April 12, 2017 Report Share Posted April 12, 2017 (edited) How do you measure if you cut meter joiner. Edited April 12, 2017 by IOAN John Zuch and IgorSky 2 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Oh, sorry, IOAN! I understood!!! I use wooden rulers as a material for making the hulls. They are made of beech, cheap and have no defects. So, I will continue Then I glued the gunwales. Bernard Kelly, Chasseur, John Zuch and 3 others 6 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Then I proceeded to planking the underwater part of the hull with the red hornbeam. JesseLee, IOAN, John Zuch and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Then I finally sanded the planes connecting the upper and lower parts of the hull, cut out the plate replacing the waterline and processed the entire hull assembly. John Zuch, IOAN, Chasseur and 1 other 4 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Then I increased the keel in the stern part of the hull Donald, IOAN, John Zuch and 3 others 6 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Then I glued the steering plate. I was thinking of making imitations of fastening loops, but they are built-in on this boat and are unlikely to be visible under water. John Zuch, Chasseur, Lboro and 4 others 7 Quote Link to comment Share on other sites More sharing options...
IgorSky Posted April 13, 2017 Author Report Share Posted April 13, 2017 Next, I cut through the deck in the places of the entrance tambours and lined the walls of the holes with planks. I do not know for sure whether there will be open doors in the entrance tambours, but, just in case, decided to refine these holes in the deck John Zuch, IOAN, Chasseur and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.